Name: MKC65 Keyboard Kit - Pre-Order
Brand: KBDFANS
Price: 96.64 EUR
Availability: OutOfStock

MKC65 Keyboard Kit (Aluminium Weight) - Group-Buy

Starts: 19th January 2024

Ends: 15th February 2024

Shipping: Q2 2024

MKC65 SPECIFICATIONS

Typing angle: 6.5°
Front height: 9 mm
Material: Full CNC 6063 aluminum
Dimension: 319.85*110.3*29.95mm
Three-in-one Structure: TOP Mount / Plate Gasket Mount / PCB Gasket Mount
QMK/VIA Supported（wired）
Support PCB stabilizers
Unbuilt Weight
With PVD WEIGHT: 1.23kg
With Alu WEIGHT: 1kg
Built Weight
With PVD WEIGHT: 1.45kg
With Alu WEIGHT: 1.22kg

WHAT CAN YOU CUSTOMIZE FOR MKC65?

8 Case Options:

4 E-coat case：E-white, Milky White, Pink, Mint Green
4 Anodized Case: Wine Red, Black, Grey, Silver

8 Weight Options:

4 Alu Weight: Gold/ Silver/ Rose Gold/ Black
4 PVD Mirror SS Weight: Gold/ Silver/ Black/ Chroma

5 PCB Options:

Wired Flex Cut Hotswap PCB( 1.2mm, Multi Layout, 7u split spacebar, No Per-key RGB, support QMK and VIA
Wired Non-Flex Cut Hotswap PCB(1.6mm, Multi Layout, 7u split spacebar, No Per-key RGB, support QMK and VIA )
Wired Solder PCB(1.6mm, Non-Flex Cut, Multi Layout, 7u split spacebar, No Per-key RGB, support QMK and VIA )

Wired Per-Key RGB Hotswap PCB (Add-on only, 1.6mm, Non-Flex Cut, ANSI Layout, support QMK and VIA )
Tri-mode Hotswap PCB (1.2mm, Non-Flex Cut, ANSI Layout, No Per-key RGB, support Mykeyclub Software
Noted: The Tri-mode technical support is provided by IRISLab.

5 PLATE OPTIONS:

Plateless
Flex Cut Plates: FR4, ALU, Brass (Brass Plate Add-on only)
Non-flex Cut Plates: PC, POM
Noted: We highly recommend using a PC/ POM/FR4 plate for Tri-mode PCB because the Brass and ALU plate will have a little affection for connectivity.

WHAT'S INCLUDED IN MKC65?

Full CNC Aluminum Top case *1
Full CNC Aluminum Bottom case *1
Weight (Anodized Alu Weight or Stainless steel PVD Weight) *1
Internal Alu Weight *1
PCB *1
Plateless or Plate *1
IXPE Foam *1
Poron Case Foam *1
Poron Plate Foam *1
Type-C Daughterboard with JST Cable *1
PCB GAS Silicone Column *12
Plate GAS Silicone Sock *18
Top mount screw and spacer *12
PCB stabilizers o-ring *12
Footpad *6
Poron case strip *6
5mm hex key *1

Gift(will not send make-up or replacements)

1 MKC Stabilizer Set
1 Type-C Cable
1 Pack of Extra Screw
M2x3mm cylindrical head screw *2
M2x8mm cylindrical head screw * 2
M3x5mm countersunk screw *2
1000mha battery (Only for the Tri-mode Version Case) *2
Silicone pad of battery compartment *2

QUALITY DISCLAIMER
1. Each kit comes with fragile labels. Please check the appearance thoroughly before building. If you see any noticeable flaws/scratches on the external surfaces, please take a photo and contact us immediately. We’ll not be responsible for any flaws/scratches found after building.
2. Due to the nature of the PVD coat, there may be minor, unavoidable dust points/micro scratches on the mirror finish of the PVD weight. The small dust points/micro scratches are only visible at just the right angle of the lighting.
3. Chroma and Gradient PVD Mirror Stainless steel weight has random nature. Each weight may have some slight differences.
4. CNC marks and imperfections inside the keyboard case or dents on the subject are not visible when the keyboard is fully built. These are normal and within our quality acceptance.
5. On all other surfaces and edges, blemishes under 2mm are approved.
6. The bottom of the Solid Aluminum Wrist Rest is defined as a B-level surface because the bottom side is the hanger side during the anodized process. The QC standard for B-level cover: blemishes under 1cm are approved on the surfaces and edges. Three or fewer fine trachoma, dust spots, etc., are within our quality acceptance (The diameter is under0.5mm). Color uniformity is a normal phenomenon around the process hole, but it is guaranteed that it will not be visible after installation.
7. Other than the case itself, all parts with cosmetic imperfections will not be replaced unless the function is damaged for usage.
8. Warranty only applicable for the first owner who purchased on our website or at our collaborative shops, with proof of purchase such as order number and confirmation.
9. Our warranty covers the PCB for one year of use or if dead on arrival without any modification.
10. Broken parts due to any human error will void your warranty. Including below list but not only

Mill-maxing PCB
Tape modding PCB
Hotswap Sockets that are pushed out of the PCB solder pads
Did not follow the steps to flash PCB and caused no function

11. Gifts will not ship out replacements or issue a partial refund.