Kei v2 by MONOKEI Add-on Parts

Kei v2 by MONOKEI Add-on Parts for

Kei v2 Top Case (60%)

• Kei v2 top case for 60% layouts. Magnets are pre-installed.    
• Layout: WK / HHKB 
• Material: Aluminium, Polycarbonate, Copper
• "Aluminium colours: Silver, Noren Blue, Blush Pink, Jungle Purple, E-white, Raw
• Copper: Sandblasted with anti-oxidant coating"   
• Note: Feet & Kaban sold separately.
  

Kei v2 Bottom Case (60%)

• Kei v2 bottom case for 60% layout. Magnets are pre-installed.     
• Material: Aluminium, Polycarbonate    
• Aluminium colours: Silver, Noren Blue, Blush Pink, Jungle Purple, E-white, Raw    
• Note: Kaban sold separately.     
  

Kei v2 MX PCB (60%)

• Only compatible with MX switches.
• Supports PCB mount stabilisers
• Designed for MONOKEI by Kopibeng
• Spacebar Orientation: North
• 1.6 mm FR4 PCB
• RGB underglow
• PCB comes flashed with the requisite firmware. Please use VIA to modify it.
• Bluetooth daughterboard, JST cable and battery sold separately.   

Kei v2 MX Plate (60%)    

•  Material: Aluminium, Polycarbonate, Copper    

Kei v2 EC PCB and Plate Bundle (60%)

• Only compatible with electrocapacitive parts.
• Tested with Deskeys and OEM parts.
• Designed for MONOKEI by Cipulot
• Spacebar Orientation: North
• 1.6 mm FR4 PCB
• Aluminium (silver) plate
• 2u mods are EC compatible (not included in the bundle)
• Spacebar requires MX plate mount 7u stabiliser (not included in the bundle)
• Comes with requisite screws & 2x stabiliser pads
• Comes with 1x spacebar 1u housing
• Comes with requisite screws & 2x stabiliser pads
• PCB comes flashed with the requisite firmware.
• Please use VIA to modify it.
• Bluetooth daughterboard, JST cable and battery sold separately.

Kei v2 Silicone Pack (60%)

• The silicone pack comes with    
• 4 x feet     
• 8 x gasket socks       
• 1 x USB cover       
• 1 x battery sleeve       
• 1 x 60% plate dampener       
• 1 x 60% Seion sheet (in PORON® Black)       
• *Note: Plate dampener is not supported with EC build    

Kohaku Backplate for Kei v2 (60%)   

• Material and Colour: Aluminium Silver    
• Finishing: Anodised with Enamel Infill    
• Includes 4 backplate screws    
• Designed by SINGAKBD   

Kei v2 Top Case (65%)

• Kei v2 top case for 65% layouts. Magnets are pre-installed.    
• Layout: WK
  
• Material: Aluminium, Polycarbonate, Copper
• "Aluminium colours: Silver, Noren Blue, Blush Pink, Jungle Purple, E-white, Raw
• Copper: Sandblasted with anti-oxidant coating"   
• Note: Feet & Kaban sold separately.
  

Kei v2 Bottom Case (65%)

• Kei v2 bottom case for 65% layout. Magnets are pre-installed.     
• Material: Aluminium, Polycarbonate    
• Aluminium colours: Silver, Noren Blue, Blush Pink, Jungle Purple, E-white, Raw    
• Note: Kaban sold separately.     
  

Kei v2 MX PCB (65%)

• Only compatible with MX switches.
• Supports PCB mount stabilisers
• Designed for MONOKEI by Kopibeng
• Spacebar Orientation: North
• 1.6 mm FR4 PCB
• RGB underglow
• PCB comes flashed with the requisite firmware. Please use VIA to modify it.
• Bluetooth daughterboard, JST cable and battery sold separately.   

Kei v2 MX Plate (65%)    

•  Material: Aluminium, Polycarbonate, Copper    

Kei v2 EC PCB and Plate Bundle (65%)

• Only compatible with electrocapacitive parts.
• Tested with Deskeys and OEM parts.
• Designed for MONOKEI by Cipulot
• Spacebar Orientation: North
• 1.6 mm FR4 PCB
• Aluminium (silver) plate
• 2u mods are EC compatible (not included in the bundle)
• Spacebar requires MX plate mount 7u stabiliser (not included in the bundle)
• Comes with requisite screws & 2x stabiliser pads
• Comes with 1x spacebar 1u housing
• Comes with requisite screws & 2x stabiliser pads
• PCB comes flashed with the requisite firmware.
• Please use VIA to modify it.
• Bluetooth daughterboard, JST cable and battery sold separately.

Kei v2 Silicone Pack (65%)

• The silicone pack comes with    
• 4 x feet     
• 8 x gasket socks       
• 1 x USB cover       
• 1 x battery sleeve       
• 1 x 65% plate dampener       
• 1 x 65% Seion sheet (in PORON® Black)       
• *Note: Plate dampener is not supported with EC build    

Kohaku Backplate for Kei v2 (65%)   

• Material and Colour: Aluminium Silver    
• Finishing: Anodised with Enamel Infill    
• Includes 4 backplate screws    
• Designed by SINGAKBD   

Kei v2 Kaban

• Internal Dimensions: approx. 27.1 x 9.5 x 3 cm, comes with 5 pieces of removable foam and can support up to 32.7 x 12 x 3 cm        
  
• External Dimensions: 38 x 18 x 6 cm  
• Colour: Black with copper accent       
• Supports 60%~65% Keyboards       
• Comes with Kei v2 velcro patch and white microfibre cloth.        

Kei v2 Bluetooth Daughterboard Pack

Your bluetooth daughterboard pack comes with:

• Bluetooth daughterboard
• daughterboard cable
• daughterboard screws
• Lithium-ion polymer battery

Additional Information

• Bluetooth daughterboard and battery is FCC and CE certified
• Battery nominal voltage is 3.7 V and its capacity is 760 mAh
• Tested with Kei v2. Compatible with QMK/VIA.

Regional Vendors       

• CA: Ashkeebs
• TH: Aiglatson Studio
• TW: INPAD
• HK: Kibou
• UK: Prototypist
• ID: Acid&Co
• US: Mekibo
• MY: Rebult Keyboard
• VN: Iconlabs

Quality Expectations:                  

While we strive to provide a perfect experience no kit can be 100% flawless at our scale of production, as such the caveats are as follows:                        

• No scratches on exposed / user facing parts of the keyboard (after installation of plate & PCB).
• Possible machining marks / micro scratches on the inside of the kit / pieces not exposed to the user. This includes scratches arising from anodisation hooks.     
• Screw holes are NOT anodised.                      
• Possible marks close to screw area.                       
• Raw top and bottom pieces may have scratches present and are susceptible to scratches                       
• Anodisation and e-coating variation may be present between top and bottom pieces.                       
• Copper patina: Copper as a material tarnishes over time, you can clean it but note that it's a form of oxidation that we cannot control.                       
• Marks / streaks that are not visible after assembly.                      
• Please note that your purchase denotes agreement to Pre-Order rules which include all the above.                        
  

If you have questions regarding this product or need any other assistance please contact us via our contact form or write us an E-Mail to: support@keygem.com

You can also join our Discord Community to get the latest news and support here: KEYGEM Discord

Frequently asked questions will be added to our FAQ.