Chaosera PCB Mount Stabilizers

Chaosera PCB Mount Stabilizers

Both our steel wire and plastic stabilizers work on the same principle. We've added a soft "tongue" to the structure. The pre-compression characteristics of this small tongue will self-adapt to the pressure of the steel wire. Therefore, the requirements for the straightness and balance of the steel wire are greatly reduced, allowing the satellite stabilizers to be used without much adjustment right out of the box.

At the same time, due to the high precision of the injection mold, the requirement for lubrication has been greatly reduced. In the past, when stabs were not properly adjusted, it was usually necessary to use a large amount of grease to eliminate noise, and repeated disassembly and reassembly were required for testing. For our new stabs, after testing, we found that using a large amount of lubricant actually makes the feel sticky. The recommended lubrication method is that the housings and stems do not need any lubrication. Only a small amount of grease needs to be applied at the bend of the wires .

Including:

•  5 pairs of housings
• 4 2U wires
• 1 6.25U wire
• 1 7U wire (standard 4+1 layout)

If you have questions regarding this product or need any other assistance please contact us via our contact form or write us an E-Mail to: support@keygem.com

You can also join our Discord Community to get the latest news and support here: KEYGEM Discord

Frequently asked questions will be added to our FAQ.