NAMA - Standard Edition - Group-Buy

Starts: 9th December 2025

Ends: 23rd December 2025

Estimated Shipping: Q2 2026

Specification:

• Keyboard Layout 80%

• Finish Treatment Anodized/PVD

• Typing Angle 7.6°

• Front Height 19.3mm

• Gross Weight Alu Bottom case: 7.5 kg ; Brass Bottom case: 9.5 kg

• Dimensions 375.9*172.1*46.6mm

• Case Material 6063Aluminum

• Mounting Style Top Mounting/Silica Gel Particle Mounting

• Default PCB 1.6mm Tri-mode non-flex cut PCB

• Default Plate Alu Plate

• Supported Layouts ANSI, ISO

• RGB Support Yes

• VIA Support Yes

• Hotswap Support Yes

• Battery Capacity 4000mAh*2

• Connection Methods USB/BLE/2.4G

• Bluetooth PCB Polling Rate 133Hz

•  2.4GHz Polling Rate 1k

• Wired Polling Rate 1k

• OS Compatibility Win/Mac/Linux/Android

   

   

   

Note: The image serves as a mere representation. The final product may vary due to bulk production.

• Case (Knob+ movement +internal Weight + Daughterboard)
• Default Dampening Foam Kit (Cork Edition)
• 1.6mm Tri-mode RGB PCB (Non-flex cut)
• Default Alu plate
• Storage Case
• 2.4GHz Receiver
• USB-C Cable
• Battery
• Rubber Feet

Q1: Is the NAMA knob removable?

Please Note : To protect your warranty, the knob on the NAMA keyboard is removable, but its core movement is permanently sealed and is not meant to be disassembled. Any damage caused by tampering with the movement will not be covered under our after-sales service.

Q2: How to operate the standard flywheel and tourbillon, and key precautions.

Movement Instructions
This manual movement should be wound a maximum of 30 turns, providing approximately 1–2 days of power reserve.

Note: Do not exceed the recommended turns, as overwinding after the mainspring is fully tensioned may cause it to slip.

How to Identify Full Wind
Through the transparent case back, observe the tightness of the mainspring inside the barrel. When the coils appear fully compacted, the movement is fully wound, and winding should be stopped immediately.